The CET provides a self-contained, gazoline-powered, “slide-in” type compressed air foam system (CAFS)  unit. The CAFS unit is designed to fit into the back of a standard length and width pick-up truck body.

The CAFS is designed to discharge water only, air only or compressed air foam from the same discharge outlet. In addition, the consistency of the compressed air foam (expansion ratio), wet/dry is fully adjustable.

Engine

The power to drive the system is provided by a Kohler, 2-cylinder, 4-cycle, air-cooled gaz engine at a rating of 36HP @ 3600 RPM.

Water Pump

The water pump is a CET model MR single-stage centrifugal pump with a vertically split aluminum case with replaceable bronze impeller and seal rings on a stainless steel shaft.

Air Compressor

The air compressor is of the oil injected piston type, designed and installed to supply a minimum of 60 CFM at 100 PSI of air at maximum engine RPM.

Foam Proportioner

The foam proportioner is a Foampro model 1601 automatic,  12-volt, direct-injection system capable of maintaining a solution ratio of as low as 0.1% to at least 1% of class “A” foam.

Dimensions

• Length : 48”
• Width : 48”  
• Height : 38”
• Weight : 850 lbs.

Performance

• Water Pump : 175GPM @ 80 PSI
• Air Compressor : 60 CFM @ 100 PSI